What should I do if the electric water heater does not produce hot water after cleaning?

Commonly used water heaters in general households include electric water heaters and gas water heaters. There is no gas supply in some areas, and most of them use electric water heaters. Don’t just look at the clean and tidy surface of the electrical appliances. In fact, everyone should be more concerned about the inside. After the water heater has been used for a long time, if it is not cleaned immediately, it will affect the service life of the water heater and may even affect the body.

Home appliances of this kind are inconvenient to disassemble and assemble, and they are usually cleaned by professional cleaning staff. However, many people say that the water heater does not produce hot water after cleaning.

1. Check to see if other parts inside were damaged during the cleaning process. Pay special attention to strengthening protection during cleaning to prevent damage to the parts caused by spraying water to other locations during cleaning.

2. Generally, heating is when the heating rod is running. Check whether the heating rod is damaged. If the heating rod fails, replace it.

3. Check if the safety valve is abnormal

Electric water heater is a relatively complicated electrical appliance. If it is not possible to determine whether it is caused by the above 3 points, it is best to contact a professional person to come to check it for safety.

But in any case, in the process of checking or cleaning the electric water heater, it is necessary to ensure that the power supply is absolutely disconnected, and the operation can be carried out in a safe process.